edelkrone App

edelkrone App v2: slik står det nå (november 2026)

edelkrone App v2 - Where Things Stand (November 2026)

This page is the single source of truth for where App v2 stands. It covers everything that has shipped since launch, what is still coming, and what we know about the road ahead. We update it with every release.


Download the App

App v2 is available on the App Store and Google Play.

TestFlight is still available and serves a different purpose. The App Store build contains fully completed features. TestFlight is where we push experimental beta and alpha work for those who want to try things early.

App v2 also runs on Apple iPad and Mac. If you need to go back, you can switch to the legacy v1 app at any time. When you do, the app will prompt you to reset your firmware to match.


What's in the App Right Now

Legacy features, fully supported: Timelapse, Keypose (up to 12 positions), Point Mode, 360 Mode (Turntable and Panoramic). Timelapse can start from any two of your saved keyposes.

Motion Chain is live across all body devices. JibONE and JibPLUS support Motion Chain in standalone use, without requiring a head device. Multi Point Motion Chain is also available.

Motion Chain Timelapse is available on Dolly products: DollyONE v2 and DollyPLUS v2 on their own, and Dolly GO. Support across the rest of the ecosystem is in testing.

Free Move Mode for DollyPLUS is available.

Packshot Edge Bundle (SliderPLUS + Dual HeadONE) support is live, including turntable control in Point Mode.

Focus/Zoom Module v2 (previous generation) is supported and can be paired with HeadPLUS units.

iPad and macOS are supported. Multiple independent instances can be run side by side on iPad.

Roll Movement Integration gives you 3-axis control by adding Roll to Pan and Tilt. Requires the Roll Module. Roll axis is supported on HeadPLUS v3 PRO across all configurations, and a roll axis can be attached directly to a HeadPLUS for a standalone 3-axis setup without an additional body device.

Wired Communication for PLUS devices is available via the Link port. Requires the Link Cable included with HeadPLUS. Linking 3 or more devices requires the edelkrone Wired Signal Hub.

Live Mode keeps motors continuously engaged while the system is on, eliminating wake-up vibrations between movements. You can still make manual adjustments by gently pushing the system, which temporarily disengages the motors.

Vision Module is fully supported with HeadPLUS: monitor mode and face tracking are both live. Wi-Fi setup fills in your network name automatically.

Known issue: Vision Module face tracking does not yet work when your camera records at 23.976, 29.97 or 59.94 fps. A fix is in progress. Until it ships, set your camera to a whole-number frame rate such as 24, 25 or 30 fps.

Phone Mode is back for HeadONE v2 on iOS. With a single HeadONE v2, the head follows your face, and you can tap the screen to choose where your face sits in the frame. Phone Mode is not yet available on Android.

Gimbal Module for DJI RS is supported, so your DJI RS gimbal works as a head in the app. It connects to other edelkrone devices, works with Focus Module, and can be recentered and locked from the app.

edelkrone Controller (v1 and v2) works with all devices supported in App v2. The Controller is updated through the app.

Turntable setups are available with HeadPLUS v3, HeadPLUS v3 PRO and Gimbal Module.

Dolly GO is supported, including Motion Chain Timelapse.

Notifications bring firmware updates, product announcements and tips from edelkrone to your phone.

Krone X Mini setup is now possible for HeadPLUS owners by combining JibONE and DollyONE.


Release History

November 12, 2026

  • Easier Vision Module Wi-Fi setup: The network name is filled in automatically from the Wi-Fi your phone is connected to. Network names and passwords with special characters (such as Ş, ğ, é) now work, and the app shows you where to find your Wi-Fi password on your phone.
  • More flexible Timelapse: Start a timelapse with two or more saved keyposes and pick any two as your start and end points. You no longer need to delete the extra keyposes first.
  • Consistent navigation: Settings now opens in place, like the other top buttons, both in the device list and while connected to a device. The top menu stays visible, so one tap takes you back to device control.
  • Notifications: Get firmware updates, product announcements and tips from edelkrone on your phone. Tap a notification to open the related page.
  • Gimbal Auto Lock: Choose how long an idle Gimbal Module waits before it locks itself (3, 5 or 10 minutes), or turn it off.

November 2, 2026

  • Phone Mode for HeadONE v2 (iOS): Phone Mode returns in App v2. The head follows your face, and you can tap the screen to choose where your face sits in the frame. Phone Mode is not yet available on Android.
  • Vision Module firmware updates: Vision Module firmware can now be updated from the app.
  • Uninterrupted loops: A running loop keeps moving when you switch to another app, reopen the app or open Settings.
  • Minor bug fixes and improvements.

October 2, 2026

  • Gimbal Module support: Gimbal Module for DJI RS can now be used in the app and connected to other edelkrone devices, including Focus Module.
  • edelkrone Controller: Controller v1 and v2 now work with all supported devices. The Controller is updated through the app.
  • Turntable setups: Turntable control added for HeadPLUS v3, HeadPLUS v3 PRO and Gimbal Module.
  • 360 Mode: Tilt-only panoramas now work.
  • Separate lens maps: Lenses mapped on a Gimbal Module and lenses mapped on a head are kept separate, so each device uses its own.
  • Improvements and bug fixes.

September 17, 2026

  • Vision Module face tracking: Face tracking with HeadPLUS is live. This completes Vision Module support in App v2.
  • Various bug fixes and improvements.

August 24, 2026

  • Vision Module monitor mode: The monitoring side of Vision Module support is now live in the app.
  • DollyGO improvements: Chain timelapse support and joystick refinements.
  • Motion Chain Timelapse on DollyONE v2 and DollyPLUS v2: Both dollies can now run a Motion Chain Timelapse on their own, after a firmware update.
  • Tripod leveling fixes: Corrected leveling errors on tripod setups.

July 13, 2026

App

  • Corrected the zoom joystick direction.
  • Removed an unnecessary calibration screen when connecting Focus/Zoom Module PLUS PRO to HeadPLUS v3.

Firmware

  • Rodeo Mode added for Krone X setups.
  • Fixed an issue where JibPLUS motors would power on and off unexpectedly.
  • Motors now respond faster when waking from sleep during point tracking.
  • Failed-to-move detection added to DollyPLUS v2 and DollyONE v2.
  • Resolved slowdown during point transitions while Focus/Zoom Module was in zoom mode.
  • Fixed dolly hesitation during Link-connected movements in Krone X setups.

July 1, 2026

New Features

  • HeadPLUS v3 PRO Roll Support: Roll axis infrastructure added to HeadPLUS v3 PRO. Roll axis can now be used across all configurations.
  • Standalone 3-Axis Setup: A roll axis can be attached directly to the HeadPLUS without an additional body device.
  • Krone X Mini Setup: HeadPLUS owners can combine JibONE and DollyONE to build a Krone X mini setup.
  • Live Mode: A new setting that keeps motors continuously engaged while the system is on, preventing the wake-up vibrations that occurred when motors cycled off and on between movements. Manual adjustment still works by gently pushing the system, which temporarily disengages the motors.

Improvements & Bug Fixes

  • Krone S Bundle: Fixed an issue that prevented changing the slider's targeting direction mid-shoot.
  • Loop Mode Vibration: Resolved jitter in loop mode by keeping motors from powering off and on at the end of each movement.
  • Joystick Inversion: Corrected the roll axis joystick direction to match standard expectations.
  • Firmware Updates: Fixed a bug that caused firmware updates to stall or remain incomplete on certain devices.

June 25, 2026

edelkrone App v2 became officially available on the App Store, ending the TestFlight-only period for stable releases. Going forward, the App Store build always contains fully completed features, while TestFlight is used for earlier-stage beta and alpha work.

June 16, 2026

New Features

  • Roll Movement Integration: 3-axis control by adding Roll to Pan and Tilt movements using the HeadPLUS and HeadONE combination. Requires HeadPLUS, HeadONE, and the Roll Module.
  • Wired Communication for PLUS Devices: Link SliderPLUS, JibPLUS, DollyPLUS, and HeadPLUS via cables for a stable, zero-drop connection. Useful in crowded wireless environments. Requires the Link Cable included with HeadPLUS. Linking 3 or more devices requires the edelkrone Wired Signal Hub.

Improvements

  • Enhanced Jib Tracking: Tracking on all Jib products is significantly more responsive with higher resolution. Especially noticeable over the wired Link port connection.
  • Faster JibONE with HeadPLUS: Slowness issues when pairing JibONE (v1 and v2) with HeadPLUS resolved.
  • Apple Device Battery Display: Improved battery level monitoring and display accuracy.

Bug Fixes

  • Fixed an issue where the app would sometimes misread a press-and-hold on a position button as a tap, causing unintended camera movement.
  • Resolved a jitter bug when repositioning an active point using Frame Shift in Point Mode.
  • Fixed a bug that caused SliderONE to incorrectly prompt for a firmware update at startup.
  • Hidden inapplicable options from menus to clean up the UI.
  • Corrected minor display errors for device names and firmware versions in the Settings info screen.

May 19, 2026

  • Fixed an issue where the 360 mode interval was not working correctly.
  • Resolved mid-motion slowdowns in the motion chain.
  • Corrected point tracking errors in Packshot Edge Bundle setups.
  • Minor bug fixes and performance improvements.

May 12, 2026

  • Increased Keypose Limit: Savable keyposes raised from 6 to 12, allowing significantly more complex motion chain sequences.
  • Simplified Calibration: Head calibration on sliders streamlined to a single unified standard, with updated on-screen visuals. Please follow the new visual guides carefully during calibration.
  • Standalone Motion Chain for JibONE & JibPLUS: Both jibs support Motion Chain without requiring a head device. All edelkrone body devices can now independently execute motion chains.
  • Minor optimizations and bug fixes for overall app stability.

April 2026

  • Turntable Center Improvements (PackShot Master Bundle): Direct center marking when the center is physically visible, a Skip feature that keeps taught points fixed in space during turntable rotation, and Laser Module support for center teaching. One tap when the center is visible, two taps when it is not.
  • Multi Point Motion Chain: Points can be assigned to Positions. The system transitions to both simultaneously, unlocking complex layered camera moves. Shot Breakdown videos are available on the edelkrone Academy.
  • Replace Position in Motion Chain: Saved positions can be updated without deleting and recreating them.
  • JibONE & JibPLUS point tracking improvements: Noticeably more consistent tracking when calibration is accurate.
  • JibPLUS Drift Lock: Motors hold a soft-lock state at the end of each move. The jib holds its position until nudged by hand, at which point the lock releases automatically.
  • iPad & macOS support: App v2 runs natively on iPad and Mac. Multiple independent instances can be opened side by side on iPad.
  • Tap to Save: Saving a Position, Keypose, or starting point teaching requires a single tap instead of a long press. Long press is still used to delete.
  • Independent speed & acceleration per transition type: Point and Position transitions have separate speed and acceleration settings.
  • Focus Shift: Single vs. Global (Point Mode): Single Shift adjusts focus when the target surface is behind the taught point. Global Shift offsets the entire lens map to reconcile the camera's mathematical and physical positions.
  • Packshot Edge Bundle, turntable in Point Mode: One HeadONE handles point tracking while the other drives a turntable.
  • Lens Mapping, redesigned: Streamlined flow from infinity to close focus. The Lens Community database was reset as part of this change.
  • Dolly: Match Position: Clears accumulated positional drift by letting you physically return the dolly to a known location and resync. Demo available on the edelkrone Academy.
  • Dolly: Arc & Line Path Flexibility: When the dolly is pulled off a path manually, the app offers three options: Move Path, New Path, or Recover Path.
  • Focus/Zoom Module v2 support: Previous generation module fully supported in App v2.

Launch (Early 2026)

  • Timelapse, Keypose, Point Mode, 360 Mode (Turntable and Panoramic): all legacy features supported.
  • Motion Chain (requires Head and Body device pairing).
  • Free Move Mode for DollyPLUS.

What's Coming Next

In September we gave target dates for three features. Face tracking shipped on time. Phone Mode shipped a month late, and so far only on iOS. Motion Chain Timelapse across the full ecosystem is in testing and has not shipped yet. We will post its new date here.

Feature Target Status
Vision Module face tracking (completes Vision Module support) September 2026 Shipped September 17
Phone Mode Return October 2026 Shipped November 2 on iOS
Phone Mode on Android Not dated yet Not released yet
Motion Chain Timelapse across the full ecosystem November 2026 In testing, new date to follow
Face tracking at 23.976, 29.97 and 59.94 fps Not dated yet Fix in progress

On Tap to Move

We need to be direct about this one. Controller-free operation, which we called Tap to Move, is not going to ship. We were not able to get it to a level of reliability we would be comfortable putting in your hands, and we would rather say that plainly than keep moving the date.

We know some of you may have purchased a product specifically because this feature was on our roadmap. If that is your situation, please get in touch with us. We want to make it right.


A Note on All of This

When you invest in edelkrone hardware, the software running it should keep getting better over time. That is the commitment. Some updates arrive on schedule, some arrive late, and occasionally something does not arrive at all. We will keep being straight with you about where things stand, including when the news is not good.

If you are using any of the new features and running into something unexpected, the edelkrone Academy is a good first stop. More updates are on the way.

The edelkrone Team

Les neste

Utstyr og kontrollere fra edelkrone og en bærbar PC som kjører edelkrone MCP, i et mørkt studio

DJI and DJI RS are trademarks of DJI.